Not in the new shop yet

Delivered anywhere in the UK

Roller Banner Design: What Works at 3 Metres

A roller banner works when it says one thing, clearly, to someone walking past three metres away. Put your logo at the top, one short headline under it in big type, and keep the colours strong against each other. Contact details go lower down, kept short.

Our roller banners are 850 × 2000mm and start at £43.50 inc VAT. If you already have a stand, a replacement graphic starts at £41 inc VAT.

By the Liberty Signs team · Updated 22 Nov 2026 · 3 min read

One Message

People glance at a roller banner for a moment as they walk past. In that moment they should understand who you are and one reason to stop.

Pick the single thing you most want them to know: what you do, the product you are launching or the offer on the day. Everything else, from your full service list to your history, belongs in a leaflet or a conversation.

A good test: if you cannot say the message in about ten words, it is too much for a banner.

Logo High, Message Next

At 2000mm tall, the top of a roller banner is at or above eye level, where people see it over tables and heads. That is where your logo and headline go. - Top: your logo, big enough to recognise from across the room. - Upper middle: your headline, the one message. - Middle: one image, or three short points at most. - Lower part: your web address, phone number or a QR code.

The bottom of the graphic sits close to the floor, where the base, a table or people standing in front can hide it. Keep anything important higher up. Our guide to roller banner sizes explains the stand and the graphic.

Big Type That Reads at 3 Metres

Most people read a roller banner from a few metres away, so the type has to be bigger than it looks on your screen. - Headline: the largest words on the banner, in a bold, plain font. - Points and contact details: smaller, but still readable from a few steps back. - Fonts: one or two at most. Thin, script and condensed fonts are harder to read at a distance.

As a rule of thumb, allow about 25mm of capital-letter height for every 3m of reading distance as the smallest size, and go bigger for your headline. Our guide to letter height and reading distance explains the rule.

Contrast and Colour

Dark text on a light background, or light text on a dark one, reads best. Avoid text over a busy photo, and avoid pale text on a pale colour.

Use your brand colours, but give the words room. A plain background behind the headline does more than a full-page image with words laid on top.

Screens glow and print does not, so colours can look a little brighter on screen than on the finished banner. If you have exact brand colours, put the Pantone references in your file or in a note.

Contact Details and the File

Give one or two ways to reach you, not all of them. A web address and a phone number, or a QR code that goes to a page about what is on the banner, is usually enough. Test any QR code with your phone on the proof.

Set the file up at 850 × 2000mm for our roller banner, or at the size of your own stand for a replacement graphic: 800, 850 or 1000mm wide at 2000mm high, or 800 or 850mm wide at 2200mm high. Our guide to preparing artwork for print covers bleed and file types.

A person checks every file before we print, and you can approve your proof online, or send it to us to check first. If you would rather not design it yourself, ask for design help when you order and we quote it after.

Common Questions

Ready to Print Your Banner?

Upload your design or ask for design help, and approve your proof before we print.