Not in the new shop yet

Delivered anywhere in the UK

How Big Should the Letters Be? Reading Distance Made Simple

A good rule of thumb is about 25mm of capital-letter height for every 3m of reading distance, roughly 1 inch for every 10 feet. So letters 50mm tall can be read from about 6m, and letters 250mm tall from about 30m.

That is the size to be readable for someone who stops and looks. For people driving past or reading at a glance, go bigger. Our Letter Height Calculator works it out for your distance.

By the Liberty Signs team · Updated 22 Nov 2026 · 3 min read

Work it out with your own numbersLetter Height CalculatorTry It

The Rule of Thumb

Measure how far away the reader will be, then allow about 25mm of capital-letter height for every 3m.

This is a rule of thumb, not a standard. It assumes a clear, plain font, good contrast between the letters and the background, and someone with normal eyesight who is looking at the sign. It tells you the smallest size that is comfortably readable, not the size that grabs attention.

Capital height means the height of a capital letter such as H or E, not the lowercase letters, which are smaller in most fonts.

Letter Height by Reading Distance

Using the rule of 25mm of capital height for every 3m:

  • 3m: 25mm
  • 6m: 50mm
  • 10m: about 85mm
  • 15m: 125mm
  • 20m: about 170mm
  • 30m: 250mm

For a distance in between, work it out from the nearest line, or use the Letter Height Calculator.

When to Go Bigger

The table gives the minimum for someone standing still and reading. Go bigger when:

  • People are driving past. A driver has a moment to read the sign, often at an angle and while watching the road. Make the name and the one key word much larger than the table suggests, and keep the wording short.
  • It has to work at a glance. A shop name on a busy street competes with everything around it. Bigger letters and fewer words get noticed first.
  • The font is thin or decorative. Script, light and condensed fonts read at shorter distances than bold, plain ones.
  • The contrast is low. Dark letters on a dark background, or pale letters on a pale one, need more height to read at the same distance.

If the space is limited, cut the wording before you shrink the letters.

How to Measure Your Reading Distance

Stand where your reader will be and measure to where the sign will go.

  • Shop fascia: from the far side of the street, or from where people first come into view along the pavement.
  • Window lettering: from the pavement edge, usually a few metres away.
  • Signs on a wall or building: from the car park entrance, the road or the gate.
  • Indoor signs: from the door, the end of a corridor or the back of the room.

Our guide on how to measure for a shop sign covers measuring the space itself.

Turning Letter Height Into a Sign Size

Once you know the letter height, the sign has to be big enough to carry it, with space around the words so they do not look crammed.

A one-line name needs a panel taller than the letters themselves, with a margin above and below. Two lines need more than twice the height, plus the gap between them. The width depends on how many letters there are and how wide the font is, so a short name can use bigger letters on the same fascia than a long one.

The best check is to mock it up: set your wording at the letter height you want on your artwork, at full size, and see whether it fits the space. A person checks every file before we make it, and you can approve your proof online, or send it to us to check first. If you are close to the size where a shop sign needs planning consent, our guide to planning permission for shop signs explains the limits.

Which Sign Carries the Letters

  • Printed sign trays: a fascia sign in sizes from 600 × 300mm up, with ready sizes such as 2000 × 500mm and 3000 × 600mm. From £150.
  • Vinyl lettering: cut letters for windows and walls, from £16.
  • Flat-cut letters: individual letters for a wall, starting at about 50mm tall, from £20.50.
  • Built-up letters: deep 3D letters, which we supply from 400 × 100mm up to 6000 × 1500mm for the whole word, from £220. We can arrange fitting on a quote.
  • Aluminium signs: flat panels for walls, fences and posts, from £25.50.

For lettering on a whole building or frontage, send us your sizes and we will price it.

Common Questions

  • About 85mm of capital-letter height, using the rule of thumb of 25mm for every 3m. Go bigger if people will be driving past.
  • This guide uses a rule of thumb, not a standard. Some signs, such as safety signs, have their own rules, so check those separately.
  • Yes. Bold, plain fonts read from further away than thin, script or condensed ones at the same height. Strong contrast between letters and background helps too.
  • The rule uses capital-letter height. Lowercase letters are smaller in most fonts, so wording set mostly in lowercase needs a little more height to read at the same distance.
  • ChloeChloeAndreaAndreaWilliamWilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail

Size Your Sign With Confidence

Choose your sign tray size, set your letters at the right height and see the price as you go.