Not in the new shop yet

Delivered anywhere in the UK

Replacing a Roller Banner Graphic in Your Old Stand

If your roller banner stand still works, you only need a new graphic. Measure the width and height of your old graphic in mm, match it to one of our sizes, and fit the new one into your stand. Our replacement graphics come in 800, 850 and 1000mm wide at 2000mm tall, and 800 and 850mm wide at 2200mm tall.

Replacement Roller Banner Graphics start at £41 inc VAT. If the stand is worn or you are not sure it will take a new graphic, a complete roller banner comes with the graphic already fitted.

By the Liberty Signs team · Updated 22 Nov 2026 · 3 min read

When a New Graphic Makes Sense

A replacement graphic is worth it when the stand is sound and only the print has to change: - New branding, a new logo or a new message for this season's events. - A worn graphic, scuffed, curled or faded after a lot of use. - A run of stands that all need the same new design.

Check the stand first. Pull it up and let it roll back down. If the roller winds smoothly, the pole fits together and the feet are firm, it is worth refitting. If the roller is stiff, slack or will not hold the graphic, a new roller banner is the simpler route.

How to Measure Your Old Stand and Graphic

Measure the graphic, not the base. The base is usually a little wider than the print.

  • Width: pull the banner up and measure the printed graphic from edge to edge in mm.
  • Height: measure from where the graphic comes out of the base to the top rail, with the pole at the height you use.
  • Look for a label: many stands have a sticker under the base with the model or size. Note it down.
  • Check the pole: some poles adjust in height. A 2200mm graphic needs a pole that reaches that high.

Then match your measurements to our sizes: - 800 x 2000mm - 850 x 2000mm, the most common size - 1000 x 2000mm - 800 x 2200mm - 850 x 2200mm

If your stand is wider than 1000mm or a size not listed, ask us for a price and tell us the measurements and the make of the stand. Our guide to roller banner sizes explains the standard sizes.

What You Get

  • Grey-back roller banner film, so light does not show through from behind and the print stays solid.
  • A matt laminate as standard, which helps stop scuffs and curling as the graphic rolls in and out. You can choose No Laminate if you prefer.
  • Rolled in a tube so it arrives flat and ready to fit.

Set your artwork up at the size you order, with the logo and main message in the top half. The bottom of the graphic sits close to the floor, where the base and people can hide it. Our guide to roller banner design has more tips.

Swapping the Graphic

Every stand is a little different, so check the stand maker's instructions before you start. Our graphics are made for stands with an adhesive rail at the bottom and a clip rail at the top. In outline:

  • Work with two people on a clean floor with plenty of space.
  • Keep the roller under control. The roller inside the base is sprung. Never let go of the graphic while it is unrolled, or it can wind back fast.
  • Take off the old graphic. Pull it up, unclip the top rail, then let it roll back slowly by hand. Release it from the bottom rail as the maker's instructions say.
  • Fit the new graphic. Line it up straight and centred on the bottom rail, press it firmly along the adhesive, and guide it slowly into the base.
  • Fit the top rail. Pull the graphic up, clip the top rail on, fit the pole and check it hangs straight.

If your stand fixes the graphic a different way, or you are not sure, ask us before you order. A new complete roller banner can be easier than refitting an old one.

Ordering

Choose your size and laminate, then upload your artwork. You can approve your proof online, or send it to us to check first. If you need several graphics in the same design, order them together, as the price per graphic comes down the more of one design you order.

The lead time is shown on each product page, and there is free next-day tracked UK delivery on orders of £75 or more.

Common Questions

  • It will if your stand takes one of our sizes and fixes the graphic with an adhesive rail at the bottom and a clip rail at the top. Measure your old graphic and check the stand maker's instructions before you order.
  • 850 x 2000mm is the most common. We also make 800 and 1000mm wide at 2000mm tall, and 800 and 850mm wide at 2200mm tall.
  • Replacement graphics are made for you to fit into your own stand. If you would rather not, a complete roller banner arrives with the graphic already in the stand.
  • Our replacement graphics online go up to 1000mm wide. For a wider stand, ask us for a price with the measurements and the make of the stand.
  • ChloeChloeAndreaAndreaWilliamWilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail

Refresh Your Stand

Choose the size that matches your old graphic, upload your artwork and fit it into the stand you already have.