What You Get
- Indoor floors: printed vinyl with a textured anti-slip laminate. R10 is the slip resistance rating of that laminate.
- Outdoor paving and tarmac: a conformable pavement film that is warmed into the surface as it goes on, so it follows the texture of slabs and tarmac. It has no laminate.
- Shapes: square cut, circle, or cut to the outline of your design.
- Sizes: ready sizes from a 300mm circle to 2000 x 1000mm, or your own size in mm. Large graphics come in panels.
Floor graphics use a high-tack adhesive so they stay put under foot traffic. They are not made to peel off and be reused, so if you need a short-term message on glass instead, see our guide to static clings and window stickers.
Floors That Suit
Floor graphics need a smooth, clean, dry, sealed surface. As a guide: - Good: sealed concrete, vinyl and safety flooring, sealed timber and laminate, and smooth tiles. - Outside, with the outdoor film: paving slabs and tarmac. - Not suitable: carpet, matting, rough or dusty unsealed concrete, and floors that are wet or freshly polished.
Clean the floor first with a cleaner that leaves no residue, and let it dry fully. On a new or newly sealed floor, wait until the finish has cured. If you are not sure about your floor, send us a photo and tell us what it is.
Queues, Distance and Directions
- Queue markers: circles or footprints at the till, the counter or the door, in your brand colours rather than plain tape.
- Distance markers: a line or spot where people should wait, for example at a pharmacy counter or a reception desk.
- Directions: arrows and coloured routes that lead people through a building, a store or an event hall. They work well in open spaces where wall signs are far away.
For directions, use the same words, colours and arrows as your wall and hanging signs. Our guide to wayfinding covers planning the route, and directional signs carry it on the walls.
Events and Retail Promotions
A floor graphic catches people where they are already looking as they walk: down.
- In front of a display or shelf, to pull people towards an offer.
- At an exhibition stand or event entrance, with your logo or a welcome message.
- On the pavement outside, with the outdoor film, to point people in from the street. Check with the owner of the land first, and with your council for a public pavement.
Keep the message short and bold. People read a floor graphic while walking, often at an angle, so big words and a clear arrow beat small detail.
Fitting and Care
Floor graphics are made to fit yourself. Peel back the liner a little at a time and smooth the graphic down from the centre out, pressing the edges firmly. Outdoor film is warmed into the surface as it goes on, so for paving and tarmac we can arrange fitting on a quote.
Check them now and then. Replace any that lift at the edges or wear through in busy spots, as a lifted edge can catch a foot. Our guide to cleaning and caring for signs has more on care, and removing old vinyl explains how to take them up.
Approve your proof online, or send it to us to check first. The lead time is shown on each product page.
Common Questions
- Yes. Indoor floor graphics have a textured anti-slip laminate rated R10. The outdoor pavement film is a different, textured material with no laminate.
- No. They need a smooth, clean, dry, sealed floor, such as sealed concrete, vinyl flooring, sealed timber or smooth tiles.
- Yes. Choose Outdoor Paving and Tarmac, a conformable film that moulds into slabs and tarmac. Check with the landowner or your council before using a public pavement.
- No. They use a high-tack adhesive so they stay put under foot traffic, and they are not made to be lifted and put down again.
Chloe
Andrea
WilliamStill Have a Question?Our team can answer it now: 0161 399 0695
Chloe
Andrea
WilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail
Put Your Message on the Floor
Choose indoor or outdoor, your shape and size, and see the price straight away.