Window Vinyl and Lettering
- Warm it. Use a hairdryer, or a heat gun on its lowest setting held well back. Warm a small area at a time until the vinyl feels soft, not hot. Cold vinyl cracks into small pieces; warm vinyl comes off in strips.
- Lift a corner with a plastic scraper or your fingernail.
- Peel slowly and low, pulling the vinyl back over itself, close to the glass. Keep warming just ahead of where you are peeling.
- On plain glass, a new razor blade in a holder, held flat, helps with stubborn bits. Do not use a blade on frames, seals, painted surfaces, coated or self-cleaning glass.
- Old printed graphics that have been up in the sun a long time may come off in flakes. Patience and a little more heat help.
Never point a heat gun at one spot for long, and take extra care on double glazing and cold glass, which can crack if heated unevenly.
Glue Left on the Glass
Some adhesive usually stays behind, especially on older vinyl. - Use an adhesive remover made for glass or for the surface you are cleaning, and follow its instructions. - Test it first on a small corner, especially near frames, seals or paint. - Let it soak in, then wipe or scrape the softened glue off with a plastic scraper. - Wash the glass with soapy water, then clean it with glass cleaner so nothing is left that could stop new vinyl sticking.
Frosted film comes off the same way as lettering. Window clings have no glue at all: peel them off and keep them on their backing if you want to use them again.
Wall Stickers and Painted Surfaces
Vinyl on painted walls and doors needs more care, because paint can lift with it. Warm it gently, peel very slowly and at a low angle, and stop if paint starts to come away. Expect to touch up the wall afterwards, particularly where the vinyl has been up a long time or the paint was fresh when it went on.
Use only a mild adhesive remover on paint, test it first, and never use a blade.
Old Shop Signs
Taking down a fascia sign means working at height, and often heavy panels, hidden fixings and a rotten fascia behind. If the old sign is lit, the power must be made safe by a qualified electrician first.
Sometimes it does not need to come down at all. Our guide to replacing an old shop sign explains when a new sign tray or aluminium panel can go straight over the old one and when to strip it back. We can arrange fitting on a quote.
Van Graphics
Removing van graphics is a job for a fitter. Film on a van has been through sun and washing, and it is easy to damage the paint, leave glue in seams and recesses, or scratch the panels with the wrong tools.
When you order new van sign writing, a half wrap or a full wrap, add Remove Old Graphics on the product page and we take off the old film and adhesive at our Manchester workshop before the new graphics go on. If you only need graphics taken off, ask us for a quote.
On a leased van, check what your lease says about returning it. Our guide to how long a van wrap lasts covers leased vans and taking a wrap off.
Common Questions
- Warm it with a hairdryer or a heat gun on low, lift a corner with a plastic scraper and peel it back slowly at a low angle. Clean off any glue with an adhesive remover made for glass.
- Not if you use gentle heat and a plastic scraper. Keep blades to plain glass only, and heat double glazing and cold glass gently and evenly.
- Yes. Add Remove Old Graphics when you order new van graphics and we take off the old film and adhesive at our workshop first. For removal on its own, ask us for a quote.
- We can arrange fitting, and taking down an old sign, on a quote. Read our guide to replacing an old shop sign first, as it may be able to stay where it is.
Chloe
Andrea
WilliamStill Have a Question?Our team can answer it now: 0161 399 0695
Chloe
Andrea
WilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail
Ready for Something New?
Choose your new window lettering or sign and see the price as you go. Approve your proof online, or send it to us to check first.