The Basics for Every Sign
- Mild soapy water. A few drops of washing-up liquid in warm water is enough for most dirt.
- A soft cloth, sponge or microfibre. Nothing abrasive: no scouring pads, stiff brushes or kitchen scourers.
- Rinse with clean water and dry with a soft cloth, so drips do not leave marks.
- Work from the top down and wipe along the edges of vinyl and laminate rather than into them.
- Skip solvents such as white spirit, thinners and strong degreasers. They can cloud the laminate and soften adhesive.
- Go easy with pressure washers. If you use one on the wall around a sign, keep the nozzle well back from the sign and never aim at the edges.
How often depends on where the sign is. A sign on a busy road picks up traffic grime faster than one on a quiet street; wipe it whenever it starts to look dull.
Printed Boards and Sign Trays
Aluminium signs and sign trays have a printed face with a laminate over it, which protects the print. Clean the laminate, not the print: soapy water, a soft cloth and a rinse.
- Matt laminate is our standard on both. It cuts glare, and a gentle wipe brings it back.
- Anti-graffiti laminate is an option on aluminium signs for public spots, so marks are easier to deal with.
- Bird droppings, tree sap and road grime are best cleaned off soon, before they mark the surface.
Check the edges of the sign now and then. If a laminate edge starts to lift, tell us early rather than picking at it.
Lightbox Faces
An illuminated lightbox has an opal acrylic face or a flex face, with LEDs inside. - Switch it off first and let it cool, and keep water away from the driver and any cables. - Acrylic faces scratch more easily than metal. Use a soft microfibre cloth and soapy water only, and never a dry cloth on a dusty face, which drags grit across it. - Flex faces are a printed skin stretched across the case. Wipe gently and do not push hard on the middle. - Look at it after dark. Dark patches or flicker are a job for a qualified electrician, not for opening the case yourself.
Inside the case is for an electrician only. If you need help, ask us for a quote.
A-Boards
An aluminium A-board holds posters printed on waterproof polypropylene behind a clear cover. Wipe the cover and the frame with soapy water and a soft cloth, and dry it before folding.
Bring it in at night and in strong wind. That keeps it out of harm's way and helps it last longer. When your offer changes, snap the frames open and swap in new posters.
Fixings, Wind and Winter
- Check the fixings once or twice a year, and after a storm. Look for loose screws, gaps behind the sign and rust stains on the wall.
- Our sign trays come with fixing angles. If a tray has moved, tighten the screws into the fascia rather than adding sealant over the gap.
- Clear snow gently with a soft brush or by hand. Do not chip ice off a sign face, and never use a scraper.
- Rinse off road salt and grit on signs near the pavement or road once the weather turns.
- Do not climb on a ladder in wind or ice to reach a sign. If a high sign looks loose, keep people clear below it and get help.
Our guide to fitting a Foamex or aluminium sign explains the right fixings for each surface. For window vinyl, see how to apply window vinyl.
Common Questions
- Mild soapy water, a soft cloth or sponge, and a rinse of clean water. Avoid solvents, scourers and stiff brushes.
- Not close up. A pressure washer can lift vinyl edges and force water behind the face. Keep the nozzle well back from the sign, or wash it by hand.
- Switch it off and let it cool, then wipe the face with a soft microfibre cloth and soapy water. Anything inside the case is for a qualified electrician.
- Once or twice a year and after a storm. Look for loose screws, gaps behind the sign and rust stains on the wall.
Chloe
Andrea
WilliamStill Have a Question?Our team can answer it now: 0161 399 0695
Chloe
Andrea
WilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail
Time for a New Sign?
Choose a size and finish and see the price as you go. Approve your proof online, or send it to us to check first.