Not in the new shop yet

Delivered anywhere in the UK

Totem and Monolith Signs: Sizes, Bases and Permission

A totem or monolith sign is a freestanding sign at your entrance, car park or forecourt that carries your name high enough to see over parked cars. Ours have folded aluminium composite faces on an internal steel frame, printed on both sides as standard, on a bolt-down base plate or posts set in the ground.

Each Totem Sign is made to size, so the price online is a guide that we confirm on your proof. A freestanding sign usually needs advertisement consent, so check with your council before you order.

By the Liberty Signs team · Updated 22 Nov 2026 · 3 min read

Sizes

Choose a ready size or enter your own, from 400 × 1200mm up to 1500 × 3000mm:

  • 500 × 1500mm
  • 800 × 2000mm
  • 1000 × 2000mm
  • 1200 × 2400mm
  • 1500 × 3000mm

Sizes are width by height. A narrow totem suits a pedestrian entrance or a shop forecourt; a taller, wider one reads from the road at a business park or car dealer. For how big your lettering needs to be for drivers, see letter height and reading distance.

Base Plate or Posts in the Ground

  • Bolt-Down Base Plate: for a concrete or paved surface. The totem bolts down onto the existing ground.
  • Posts Set in the Ground: the internal posts extend 600mm below the base, to be concreted into the ground.

Check what is under the spot before you choose: buried cables and pipes, drainage and who owns the land. Totems are supply only; we can arrange fitting on a quote, including groundworks.

Faces, Colour and Lighting

  • Printed sides: Printed Both Sides is standard, so drivers see it from either direction. Printed One Side suits a totem against a wall or hedge.
  • Return colour: the sides are white as standard, or any RAL colour to match your brand.
  • Lighting: Unlit, or Illuminated Fret-Cut Faces, with your lettering cut through the faces and lit from inside.

The faces are printed and matt laminated. Keep the wording short: your name, what you do and perhaps a phone number or web address.

Do You Need Permission?

In England, signs are controlled by the Town and Country Planning (Control of Advertisements) (England) Regulations 2007. A freestanding sign such as a totem usually needs advertisement consent from your council, and a lit one is even more likely to. If your premises are a listed building or in a conservation area, there may be extra rules. Wales, Scotland and Northern Ireland have their own rules.

Check with your council planning team before you order, and allow time for an application. Our guides to planning permission for shop signs and illuminated signs and planning explain how consent works.

A Post and Panel Sign Instead

If you need a sign by an entrance or in a car park but not a full totem, a post and panel sign puts a printed 3mm aluminium composite panel on two 76mm aluminium posts. It comes as a kit with clips and caps, in panel sizes from 400 × 300mm up to 2440 × 1220mm, with 2000mm, 2500mm or 3000mm posts in silver, black, white or grey, single or double sided. From £379 inc VAT. The same advice on consent applies.

Ordering

Choose your size, sides, lighting, fixing and return colour to see the guide price. We check the size, sides and ground fixing with you and confirm the price on your proof. Send your logo and wording, or ask for design help and we will quote it after your order. You can approve your proof online, or send it to us to check first.

The lead time is shown on each product page.

The permission section is general information, not legal advice. Rules change and every site is different, so check with your council before you order.

Sources: legislation.gov.uk: The Town and Country Planning (Control of Advertisements) (England) Regulations 2007, GOV.UK: Outdoor advertisements and signs, a guide for advertisers

Common Questions

  • Usually you need advertisement consent from your council for a freestanding sign, and a lit one is more likely to need it. Check with your council before you order.
  • Totems are made to size with an internal frame and base, so we check the size, sides and ground fixing with you and confirm the price on your proof.
  • Either a bolt-down base plate for a concrete or paved surface, or posts that extend 600mm below the base to be concreted into the ground.
  • Totems are supply only. We can arrange fitting on a quote, including groundworks, so ask us when you order.
  • ChloeChloeAndreaAndreaWilliamWilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail

Get a Guide Price for Your Totem

Choose the size, sides, lighting and fixing to see a guide price, confirmed on your proof.