Wind Is the Deciding Factor
A solid banner on a fence or scaffold acts like a sail. In a strong wind it pulls on every tie and on the fence or scaffold behind it.
Our mesh banners are printed on 270gsm mesh full of tiny holes that let the wind through, so less load reaches the fence and the banner is more likely to stay put in rough weather. That is why mesh is the usual choice for scaffolding wraps, Heras fence panels and open sites.
Our PVC banners are 440gsm frontlit PVC with no holes. On a railing, a wall or a sheltered fence that is not a problem, and you get a stronger print.
See-Through and Print Colour
- Mesh: from a distance the print reads as solid. Close up you can see light through the mesh, and colours look a little lighter than on PVC. Mesh is printed on one side.
- PVC: a solid surface, so colours look bright and dense, and fine detail holds up close. If people will see it from both sides, choose Both Sides and we print on 610gsm blockout banner so neither side shows through.
If the banner is read from across a road or site, mesh looks just as good. If it is read close up, at a gate or a shop front, PVC gives the sharper result.
Sizes and Finishing
Both are made to any size you enter in mm. Banners wider than the roll are welded together from drops, so a long fence run or a full scaffold face is one banner.
- Mesh: from 1000 × 500mm, with a Heras Fence Panel size of 3500 × 1800mm ready to choose. Finishing is a reinforced hem with eyelets every 500mm, pole pockets top and bottom, or trimmed to size with no hem.
- PVC: from 300 × 300mm. Finishing is a hem with brass eyelets every 500mm, hemmed with no eyelets, pole pockets top and bottom, or trimmed to size with no hem.
Our guide to PVC banner sizes lists popular sizes and how to measure your space.
Fixing It to a Fence or Scaffold
Thread cable ties or bungees through every eyelet and pull them snug, so the banner sits flat with no slack to flap. Fix the top corners first, then work along the top edge, then the sides and bottom.
Bungees give a little in the wind, which helps on exposed sites. Pole pockets suit a frame or a pole top and bottom instead of ties.
Get the site owner's permission first, and on scaffolding ask the scaffolding contractor before anything is tied on. Our guide on how to hang a PVC banner walks through it step by step.
Ordering
Enter your width and height in mm on the product page, choose the finishing and the price updates as you go. Upload your artwork, or ask for design help and we will quote it after your order. You can approve your proof online, or send it to us to check first.
Banners are sent rolled anywhere in the UK, and the lead time is shown on each product page. For what changes the price, see our guide to banner costs.
Common Questions
- For windy sites, scaffolding and Heras fencing, yes, because the wind passes through. For railings, walls and sheltered spots, PVC gives a brighter, more solid print.
- From a distance the print reads as solid. Close up you can see light through the mesh.
- No, mesh is printed on one side. For a banner read from both sides, choose a PVC banner printed on both sides on blockout banner.
- Cable ties or bungees through the eyelets. Pole pockets top and bottom are available if you are using a frame or poles.
Chloe
Andrea
WilliamStill Have a Question?Our team can answer it now: 0161 399 0695
Chloe
Andrea
WilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail
Choose Your Banner
Enter your size in mm, pick the finishing and see the price straight away.