Not in the new shop yet

Delivered anywhere in the UK

Listed Buildings and Conservation Areas: Signs That Get Approved

A sign on a listed building can need two consents: advertisement consent for the sign, and listed building consent for fixing it, if the work affects the character of the building. In a conservation area the building may not be listed, but lit signs lose their deemed consent and many councils publish shop front design guidance.

What gets approved differs from council to council. Typically, councils favour unlit signs, muted colours, lettering that sits within the fascia and fixings into mortar joints rather than stone. Speak to your council's conservation officer before you order.

By the Liberty Signs team · Updated 22 Nov 2026 · 3 min read

Two Consents, Not One

  • Advertisement consent is about the sign itself: its size, position, lighting and look. It comes from the advertisement regulations, and many unlit shop signs have deemed consent. Our guide to planning permission for shop signs explains when.
  • Listed building consent is about the building. Under section 7 of the Planning (Listed Buildings and Conservation Areas) Act 1990, works that would affect the character of a listed building need consent, and that can include fixing a sign to it, even when the sign would not otherwise need advertisement consent.

Your council decides whether your sign needs one consent, both or neither. Doing works that need listed building consent without it is a criminal offence, and the council can make you put things back, so ask first.

Conservation Areas

A conservation area does not need listed building consent unless the building itself is listed, but the rules are tighter: - Lit signs: deemed consent for lit signs on business premises does not apply, so any lit sign needs advertisement consent. Our guide to illuminated signs and planning explains the lighting rules. - Design guidance: many councils publish a shop front design guide or conservation area appraisal. Read it before you choose a sign. - Areas of Special Control: some areas have lower limits on sign height and letter size. - Local directions: a council can ask the Secretary of State to remove deemed consent for some signs in a set area, so check whether one covers your street.

What Councils Typically Favour

Every council and every building is different, so treat this as typical, not a promise. Ask your conservation officer what suits your building. - Unlit signs, or very discreet lighting. - Colours that suit the building, often darker or muted shades, and matt finishes rather than gloss. - Lettering within the fascia, in proportion to the shop front, without covering mouldings, pilasters or brickwork. - Individual letters or a painted look rather than a large box sign. - Traditional materials and styles, such as painted timber or hand-painted lettering. We don't make timber fascias or hand-painted signs; the options below are aluminium, acrylic and Foamex. - Fixings into mortar joints, not drilled into stone or brick faces, so they can be removed later without damage. - Fewer signs. One fascia sign and a small plaque by the door often says enough.

Talk to the Conservation Officer First

Many councils offer pre-application advice, and it is the quickest way to find out what will be accepted. Bring: - photos of the building and the shop front, straight on and close up - the size of the fascia in mm, and where the sign will go - your design, colours and the material you have in mind - how it will be fixed, and whether it is lit

Once you know what is likely to be accepted, apply for any consents you need and wait for the decision before the sign goes up. Our guide to measuring for a shop sign shows what to measure.

Signs That Suit Older Buildings

  • Fret-cut sign trays from £150 inc VAT. Your letters are cut out of the tray face with opal acrylic behind, unlit, with black, white or silver returns and a matt laminate.
  • Printed sign trays from £150 inc VAT. A flat printed face with a matt laminate as standard, and a Pantone match so the colour matches your design guide.
  • Flat-cut letters from £20.50 inc VAT. Individual letters in Foamex, acrylic or aluminium composite, including black and brushed silver, supplied with locators and a fixing template.
  • Office plaques from £46 inc VAT. A small sign by the door in brushed silver aluminium composite or acrylic, with chrome stand-offs or drilled holes.

Approve your proof online, or send it to us to check first, and share it with your conservation officer if they want to see it. We can arrange fitting on a quote.

This guide is general information, not legal advice. Every council and every building is different; speak to your conservation officer before you order. This guide covers England; Scotland, Wales and Northern Ireland have their own rules.

Sources: legislation.gov.uk: Planning (Listed Buildings and Conservation Areas) Act 1990, section 7, legislation.gov.uk: The Town and Country Planning (Control of Advertisements) (England) Regulations 2007, GOV.UK: Outdoor advertisements and signs, a guide for advertisers

Common Questions

  • If fixing the sign would affect the character of the listed building, yes, and that can apply even when the sign does not need advertisement consent. Ask your council.
  • Sometimes, but it always needs advertisement consent there, and many councils prefer unlit signs. Ask the conservation officer before you order.
  • It varies by council and building. Typically they favour unlit signs, muted colours, matt finishes and lettering that sits within the fascia. Your council's shop front design guide is the best place to start.
  • No. We make aluminium sign trays, cut letters and plaques, which can be made in muted colours with a matt finish.
  • ChloeChloeAndreaAndreaWilliamWilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail

Choose a Sign That Suits the Building

Pick a fret-cut tray, cut letters or a plaque, and see the price for your size straight away.