Not in the new shop yet

Delivered anywhere in the UK

Cut to Shape Signs and Props: What You Can Have Made

A cut to shape sign is a printed board cut around the outline of your design instead of a plain rectangle. Logo shapes, arrows, speech bubbles, photo props, life-size cut-out figures and display pieces are all made this way, in Foamex, aluminium composite or Correx.

You pay by the size of the box your shape fits in, whatever the outline. Cut to Shape Signs start at £17.50 inc VAT.

By the Liberty Signs team · Updated 22 Nov 2026 · 3 min read

What You Can Have Made

Anything you can draw as one solid outline can be printed and cut to that outline. The most common pieces are:

  • Logo shapes: your logo cut out on its own, for a reception wall, a counter front or a shop display.
  • Arrows and pointers: to send people to a door, a till or a stand.
  • Speech bubbles and photo props: for events, open days and selfie corners, held up by hand.
  • Cut-out figures: a person, mascot or product at life size. There is a ready size of 1800 × 600mm for a standing figure.
  • Display pieces: stars, price bursts and product shapes for windows, shelves and counters.

If your piece is a plain rectangle, a Foamex sign is the simpler choice, from £17 inc VAT.

Which Board to Choose

  • Foamex 3mm: light and easy to handle, for small props and indoor display pieces.
  • Foamex 5mm: the standard. Stiff enough for most shapes, signs and cut-outs.
  • Foamex 10mm: the thickest and stiffest Foamex, for large shapes and freestanding pieces that need a solid edge.
  • Aluminium Composite 3mm: the choice for shapes that live outdoors, such as a logo shape on a wall outside.
  • Correx 3.5mm: a light, low-cost fluted plastic for short events and one-off props.

Our guides to Foamex, aluminium composite and Correx explain each board in more detail.

How Size and Price Work

Measure the width and height of the box your shape fits in, in mm, and enter that on the product page. The price follows that box, so a star and a square of the same size cost the same.

The smallest shape is 100 × 100mm, and there are ready sizes from A4 to A1 and 1000 × 1000mm. Shapes bigger than a single board are cut in sections that butt together.

Ordering several of the same shape brings the price of each one down, and the product page shows the total as you change the quantity.

Getting the Shape Right

  • Keep thin parts at least 20mm wide. Thin necks, spikes and fine lettering are where a shape is weakest and most likely to snap.
  • Keep the outline simple. A smooth outline around your design cuts cleaner and reads better from a distance than one that follows every small detail.
  • Think about the back. On a Single Sided prop the back is plain board, so choose Double Sided if people will see both sides.

Upload your artwork, or choose design help and we will quote it after your order. A person checks your cut line, and you can approve your proof online, or send it to us to check first. The lead time is shown on each product page.

Common Questions

  • By the width and height of the box your shape fits in, not by the outline. Enter those sizes in mm on the product page and the price shows straight away.
  • Yes. Choose Aluminium Composite 3mm for a shape that stays outdoors. Correx suits short outdoor events.
  • Smaller pieces, up to half a square metre, can have an easel strut on the back so they stand on a counter or shelf.
  • Yes. Choose the 1800 × 600mm Cut-Out Figure size, or enter your own, and upload a good quality photo. You see the cut line on your proof before we make it.
  • ChloeChloeAndreaAndreaWilliamWilliamTalk to Our Team0161 399 0695Mon–Fri 8:00 to 16:30Visit SupportSend us a message or check an orderOr message us onWhatsApporEmail

Have Your Shape Made

Enter the size of the box your shape fits in, choose the board and fixings, and see the price as you go.